Tasarımcı

AMPERELAB3D

AMPERELAB3D tasarımı 3D baskı modelleri: Cults3D sitelerinden en beğenilen 60 model tek listede.

• Cults3D profili ↗

$1,11

Drawer organizer tray 159 x 79 x 50 mm – 2x1 on an 80 mm grid, nests, no supports

Cults3D

$1,11

Handwheel for Split shaft coarse, 18 teeth - 4 sizes 25/30/36/44 mm, no supports

Cults3D

$11,25

Round duct system 150 mm – set of 43: straight ducts, socket ducts, couplers, double nipples

Cults3D

$1,11

Thumb screw knob for M3 socket head cap screw - cylinder knob, 4 sizes 16/20/25/30 mm, no supports

Cults3D

$1,11

Six-spoke handwheel for Square 6.0 mm - 4 sizes 30/36/44/54 mm, no supports

Cults3D

$1,11

Handrad mit Sechskanttasche M3 - Klemmknopf, 4 Größen 25/30/36/44 mm, stützfrei

Cults3D

$1,11

Rändelschraube M3 für Zylinderkopfschraube - Zylinderknopf, 4 Größen 16/20/25/30 mm, stützfrei

Cults3D

$1,11

Speichenrad sechs Speichen für Vierkant SW 6,0 mm - 4 Größen 30/36/44/54 mm, stützfrei

Cults3D

$1,11

Trommelknopf für Doppel-D 6,0 mm - 4 Größen 16/20/25/30 mm, stützfrei

Cults3D

$1,11

Dreispitzknopf für D-Schaft 6,35 mm, tiefe Fläche - 4 Größen 30/36/44/54 mm, stützfrei

Cults3D

$1,11

Drum knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Cults3D

$1,11

Three-point knob for D-shaft 6.35 mm, deep flat - 4 sizes 30/36/44/54 mm, no supports

Cults3D

$1,11

Dome knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports

Cults3D

$1,11

Mushroom knob for D-shaft 6.35 mm, shallow flat - 4 sizes 25/30/36/44 mm, no supports

Cults3D

$1,11

Three-spoke handwheel for Round shaft 6.0 mm - 4 sizes 25/30/36/44 mm, no supports

Cults3D

$1,11

Domknopf für Rundwelle 3/8 Zoll (9,525 mm) - 4 Größen 20/25/30/36 mm, stützfrei

Cults3D

$1,11

Pilzknopf für D-Schaft 6,35 mm, flache Fläche - 4 Größen 25/30/36/44 mm, stützfrei

Cults3D

$1,11

Dreispeichenrad für Rundschaft 6,0 mm - 4 Größen 25/30/36/44 mm, stützfrei

Cults3D

$1,11

Rändelschraube M5 für Zylinderkopfschraube - Riffelknopf, 4 Größen 20/25/30/36 mm, stützfrei

Cults3D

$1,11

Kreuzgriff mit Gewindeeinsatz M3 - Klemmknopf, 4 Größen 30/36/44/54 mm, stützfrei

Cults3D

$1,11

Thumb screw knob for M5 socket head cap screw - knurled knob, 4 sizes 20/25/30/36 mm, no supports

Cults3D

$1,11

Cross knob with heat-set insert M3 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Cults3D

$1,11

Low-profile knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Cults3D

$1,11

Octagon knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Cults3D

$1,11

Bar knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 30/36/44/54 mm, no supports

Cults3D

$1,11

Flachknopf für Rundschaft 4,0 mm - 4 Größen 16/20/25/30 mm, stützfrei

Cults3D

$1,11

Achtkantknopf für Rundwelle 3/16 Zoll (4,7625 mm) - 4 Größen 16/20/25/30 mm, stützfrei

Cults3D

$1,11

Balkenknopf für Kerbschaft 6 mm, 40 Zähne - 4 Größen 30/36/44/54 mm, stützfrei

Cults3D

$1,11

Wellenknopf für Rundschaft 8,0 mm - 4 Größen 20/25/30/36 mm, stützfrei

Cults3D

$1,11

Sternknopf für Rundwelle 10,0 mm - 4 Größen 30/36/44/54 mm, stützfrei

Cults3D

$2,24

Ventilation duct 125 mm (DN125), 100 mm long – round air duct pipe, spigot ends, no supports

Cults3D

$2,24

Rectangular duct 220x90 mm, 100 mm long – flat ventilation duct, spigot ends, no supports

Cults3D

$2,24

Rectangular duct 204x60 mm, 100 mm long – flat ventilation duct, spigot ends, no supports

Cults3D

$2,24

Rectangular duct 110x54 mm, 300 mm long – flat ventilation duct, spigot ends, no supports

Cults3D

$11,25

Lüftungsrohr-System 100 mm – 43-teilig: gerade Rohre, Steckrohre, Kupplungen, Doppelnippel

Cults3D

$11,25

Round duct system 100 mm – set of 43: straight ducts, socket ducts, couplers, double nipples

Cults3D

$2,24

Ventilation duct with socket 150 mm (DN150), 150 mm long – round air duct pipe, push-fit

Cults3D

$2,24

Ventilation duct with socket 125 mm (DN125), 150 mm long – round air duct pipe, push-fit

Cults3D

$2,24

Ventilation duct with socket 100 mm (DN100), 350 mm long – round air duct pipe, push-fit

Cults3D

$2,24

Ventilation duct 100 mm (DN100), 250 mm long – round air duct pipe, spigot ends, no supports

Cults3D

$11,25

Rectangular duct system 110x54 mm – set of 29: straight ducts, socket ducts, couplers

Cults3D

$2,24

Rectangular duct with socket 220x90 mm, 250 mm long – flat ventilation duct, push-fit, no supports

Cults3D

$2,24

Rectangular duct with socket 204x60 mm, 250 mm long – flat ventilation duct, push-fit, no supports

Cults3D

$1,11

Handrad mit Gewindeeinsatz M4 - Klemmknopf, 4 Größen 25/30/36/44 mm, stützfrei

Cults3D

$1,11

Zylinderknopf für Vierkant 12,0 mm - 4 Größen 30/36/44/54 mm, stützfrei

Cults3D

$1,11

Speichenrad sechs Speichen für D-Schaft 6,0 mm, tiefe Fläche - 4 Größen 25/30/36/44 mm, stützfrei

Cults3D

$1,11

Trommelknopf für D-Schaft 8,0 mm - 4 Größen 20/25/30/36 mm, stützfrei

Cults3D

$1,11

Scalloped knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Cults3D

$1,11

Star knob for Round shaft 10.0 mm - 4 sizes 30/36/44/54 mm, no supports

Cults3D

$1,11

Handwheel with heat-set insert M4 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Cults3D

$1,11

Cylinder knob for Square shaft 12.0 mm - 4 sizes 30/36/44/54 mm, no supports

Cults3D

$1,11

Six-spoke handwheel for D-shaft 6.0 mm, deep flat - 4 sizes 25/30/36/44 mm, no supports

Cults3D

$1,11

Dreispitzknopf für Kerbschaft 6 mm, 18 Zähne - 4 Größen 30/36/44/54 mm, stützfrei

Cults3D

$1,11

Flügelknopf mit Sechskanttasche M4 - Klemmknopf, 3 Größen 36/44/54 mm, stützfrei

Cults3D

$1,11

Domknopf für Rundwelle 5/16 Zoll (7,9375 mm) - 4 Größen 20/25/30/36 mm, stützfrei

Cults3D

$1,11

Rippenknopf für Rundwelle 12,0 mm - 4 Größen 25/30/36/44 mm, stützfrei

Cults3D

$1,11

Pilzknopf für Rundschaft 6,35 mm (1/4 Zoll) - 4 Größen 25/30/36/44 mm, stützfrei

Cults3D

$1,11

Drum knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Cults3D

$22,51

Three-point knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 30/36/44/54 mm, no supports

Cults3D

$1,11

Wing knob with hex nut pocket M4 - clamping knob, 3 sizes 36/44/54 mm, no supports

Cults3D