1/4 inch socket block 130 mm - 20 blind square pockets 10.4 mm, two rows of ten

Bench block for 1/4 inch drive sockets, 130 x 58 mm and 20 mm tall, cut by twenty BLIND square pockets of 10.4 mm, 15 mm deep, in two rows of ten at 12.4 mm pitch. - 2 mm of material between two pockets, 4 mm of solid block at each end, 5 mm of solid floor under all twenty -- one piece, twenty pockets, one file, not a set of twenty - The 10.4 mm square accepts the 1/4 inch (6.35 mm) drive square, and the body of a 4 to 13 mm socket rests ON TOP of the pocket rather than falling in - Pockets are…

♥ 0