100x60mm rectangular base (Magnetic)

ÜcretsizDownload - Share - Maintain License - Credit - Remix - Noncommercial - Exclusive

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Added at request 100x75mm rectangular base, designed to have 7off 8x1mm magnets and 4 5x1mm and also has enough room for 3off M8 steel washers which can be hot glued in place. Usable to replace citadel and similar bases, but gives a little weight to a miniature and magnetic connection for transport or movement trays.

♥ 19

MyMiniFactory'da aç

#40k #warhammer #base #gamesworkshop #rectangular #bases #citadel

Benzer modeller

The Chimera Of Dunstram 100X60mm
MyMiniFactory
Flachkanal-Bogen 45° 100x50 mm – Flachbogen, Lüftungskanal Bogen, Muffe/Stutzen
Cults3D
Rectangular duct elbow 45° 100x50 mm – short side in bend plane, flat ventilation duct bend
Cults3D
Flachkanal-Kupplung 100x50 mm – Muffe auf Muffe, Verbinder für Lüftungskanal, ohne Stützen
Cults3D
Rectangular duct coupler 100x50 mm – socket to socket, flat ventilation duct connector, no supports
Cults3D
Flachkanal mit Muffe 100x50 mm, 250 mm lang – Lüftungskanal zum Stecken, ohne Stützen
Cults3D
Rectangular duct with socket 100x50 mm, 250 mm long – flat ventilation duct, push-fit, no supports
Cults3D
Übergang Flachkanal 100x50 auf rund 80 mm, Muffe am eckigen Ende – versetzt, bei Wand bündig
Cults3D
Flat duct to round adapter 100x50 to 80 mm, socket on flat end – offset, flush to wall
Cults3D
Übergang Flachkanal 120x60 auf rund 100 mm – versetzt, bei Wand bündig, Wand-/Deckenmontage
Cults3D
Flat duct to round adapter 120x60 to 100 mm – offset, flush to wall, wall/ceiling mount, no supports
Cults3D
Flachkanal 100x50 mm, 200 mm lang – Lüftungskanal, Stutzen beidseitig, ohne Stützen
Cults3D

100x60mm rectangular base (Magnetic)

Benzer modeller

The Chimera Of Dunstram 100X60mm

Flachkanal-Bogen 45° 100x50 mm – Flachbogen, Lüftungskanal Bogen, Muffe/Stutzen

Rectangular duct elbow 45° 100x50 mm – short side in bend plane, flat ventilation duct bend

Flachkanal-Kupplung 100x50 mm – Muffe auf Muffe, Verbinder für Lüftungskanal, ohne Stützen

Rectangular duct coupler 100x50 mm – socket to socket, flat ventilation duct connector, no supports

Flachkanal mit Muffe 100x50 mm, 250 mm lang – Lüftungskanal zum Stecken, ohne Stützen

Rectangular duct with socket 100x50 mm, 250 mm long – flat ventilation duct, push-fit, no supports

Übergang Flachkanal 100x50 auf rund 80 mm, Muffe am eckigen Ende – versetzt, bei Wand bündig

Flat duct to round adapter 100x50 to 80 mm, socket on flat end – offset, flush to wall

Übergang Flachkanal 120x60 auf rund 100 mm – versetzt, bei Wand bündig, Wand-/Deckenmontage

Flat duct to round adapter 120x60 to 100 mm – offset, flush to wall, wall/ceiling mount, no supports

Flachkanal 100x50 mm, 200 mm lang – Lüftungskanal, Stutzen beidseitig, ohne Stützen