10mm Hold for Hangboard and Climbing
Kieran Hutchings · MyMiniFactory
ÜcretsizCreative Commons - Attribution - Noncommercial - ShareAlike
A 10mm edge/hold for mounting to a DIY home hangboard. One edge is flat, with the opposite having a slight concave for easier grip. The edge is mounted to the board using 25mm M8 bolts, a 20mm washer which attaches into a M8 T-Nut on the other side of the board. If you would like an alternate attachemnt method, message me.
♥ 0
MyMiniFactory'da açBenzer modeller
Camera Top Handles + Cold Shoe Monitor Mount
Printables
/https://fbi.cults3d.com/uploaders/13638839/illustration-file/7c7410f0-f113-4305-a9d7-e47c5855e4c3/porte_boucles_d_oreilles_mural_24_trous_120_mm__apercu_3d.png)
Wall earring holder 120 mm - 24 x 2 mm holes, four bosses hold it 10 mm off the wall
Cults3D
"10mm" Socket Mug (can holder)
Printables
10mm Shallow Socket Can Holder - 12oz Can Cup - The Original!
Printables
10mm Can Koozie Socket
Printables
10mm Testwürfel
Printables
10mm Dowel Rod Mount
Printables
10mm-30mm Bridging Test QUICK! 5 minute Test Print
Printables
10mm ID cable clamp for extruded aluminium profile
Thingiverse
10mm Mic Arm/Stand Cable Clip
Printables
10mm * 2.5mm Circular Magnet Handle Attachment
Printables
10mm Calibration and Orientation Cube
Thingiverse