225 Glass lift handle Audi a4 b6 b7

919 · Cults3D

$11,20CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Glass lift handle Audi a4 b6 b7 Glue the coin from 100225_5 onto the handle using solvent after attaching the small rotating handle.

♥ 0

Cults3D'da aç

#glass #lift #handle #audi #a4 #b6 #b7 #audi handle

Benzer modeller

S30/S30 pro to 1.25/2 inches filter adaptor
Thingiverse
42.4 mm / 1.67 in Pie Cut Jig 22.5° – Only 4 Cuts for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL
Cults3D
42.4 mm / 1.67 in Pie Cut Jig Kit 4 in 1 – 10° 15° 18° 22.5° – 1D 1.5D 2D Radius – Bandsaw Lobster Back Bend Set STL
Cults3D
48.3 mm / 1.9 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – 1D 1.5D 2D Radius – Bandsaw Pipe Bend Kit STL
Cults3D
48.3 mm / 1.9 in Pie Cut Jig 22.5° – Just 4 Pieces for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL
Cults3D
Frame of Silver Crown Car Version 2 (1:25 Scale)
Cults3D
Frame of old school Front engine dragster Version 2 (1:25 Scale)
Cults3D
Frame of New Zealand Superstock car Version 2 (1:25 Scale)
Cults3D

225 Glass lift handle Audi a4 b6 b7

Benzer modeller

S30/S30 pro to 1.25/2 inches filter adaptor

42.4 mm / 1.67 in Pie Cut Jig 22.5° – Only 4 Cuts for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL

42.4 mm / 1.67 in Pie Cut Jig Kit 4 in 1 – 10° 15° 18° 22.5° – 1D 1.5D 2D Radius – Bandsaw Lobster Back Bend Set STL

48.3 mm / 1.9 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – 1D 1.5D 2D Radius – Bandsaw Pipe Bend Kit STL

48.3 mm / 1.9 in Pie Cut Jig 22.5° – Just 4 Pieces for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL

Frame of Silver Crown Car Version 2 (1:25 Scale)

Frame of old school Front engine dragster Version 2 (1:25 Scale)

Frame of New Zealand Superstock car Version 2 (1:25 Scale)