3-Port Condensate Collector Manifold

A two-part 3D-printed condensate manifold: a base with three inlet hose barbs and one 3/4" PVC outlet, and a separate friction-fit lid with a screened vent. Base Interior cavity roughly 64×64mm, 50mm tall, 3mm walls, floor sloped toward the outlet for full drainage. Three inlet hose barbs, one per side (three of the four walls), positioned mid-height and angled slightly upward from horizontal so condensate can't pool in the barb itself. Barb bore sized for small-diameter tubing, confirm against…

♥ 0