35 bit impact bit holder

3difarm · Cults3D

ÜcretsizCULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

wall mounted hex bit holder

♥ 0 · ↓ 1

Cults3D'da aç

Benzer modeller

Ribbed knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Cylinder knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Knurled knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dome knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Wing knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Collet knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Triangular knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Gridfinity Bins for VMAN 100-in-1 Bit Case – Flat 5×3 or On-Edge 5×1, Stackable, 2 Colours
Printables
Marlin 2.0.5 32-bit or Arduino For Anycubic Kossel Linear Plus and Bigtree SKR 1.3 (Read Summary)
Thingiverse
35 mm negative drying hanger / hook
Printables
35 mm reusable film cassette
Printables
35 mm travel film case
Printables

35 bit impact bit holder

Benzer modeller

Ribbed knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports

Cylinder knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports

Knurled knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports

Wing knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 30/36/44/54 mm, no supports

Collet knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports

Triangular knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 25/30/36/44 mm, no supports

Gridfinity Bins for VMAN 100-in-1 Bit Case – Flat 5×3 or On-Edge 5×1, Stackable, 2 Colours

Marlin 2.0.5 32-bit or Arduino For Anycubic Kossel Linear Plus and Bigtree SKR 1.3 (Read Summary)

35 mm negative drying hanger / hook

35 mm reusable film cassette

35 mm travel film case