36" Machete from Helldivers 2

This model will help you make a cosplay prop based on the machete from Helldivers 2. The machete comes out to about 3 feet long. Things you will need: Printer that can handle 200mm along the Z and 180mm along the X and Y axis. Around 355 g of filament when printing at 20% infill. 32 inches of 1/8 inch and 1/4 inch steel rods for support - Homdepot (1/4 in. x 6 ft. Plain Steel Solid Round Rod) & (1/8 in. x 4 ft. Plain Steel Solid Round Rod) Super glue, paints, and sand paper.

♥ 0