39.5mm cage for Ryobian/mini-Protean

ÜcretsizCreative Commons — Attribution — Noncommercial — Share Alike

Ticari kullanım: izinli görünmüyor · Atıf istiyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Printables sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A 39.5mm flywheel cage sawed off at the front to fit this blaster.

♥ 2 · ↓ 15

Printables'da aç

Benzer modeller

39.5 mm cage for Ryobian
Printables
2.5" SSD or hard drive cage with spots for side mounted 80MM fans. Holds up to 3 drives that are 7mm 9.5mm or 15mm. Support for SATA, SAS, U.2
Printables
Latrax 12mm hex 9.5mm (3/8 inch) extension
Thingiverse
2.5" to 3.5" drive adapter for 9.5mm drives
Printables
Chip tray for game chips Ø 39–40 mm – 5 troughs of 20 chips, finger pockets
Cults3D
Six-point star tealight holder 90 mm, 39.5 mm blind recess
Cults3D
RC4WD Gelande II D90 - 1:10 Crawler-Staukiste mit zwei Deckelvarianten – 142 × 23,5 × 39 mm
Thingiverse
Advent wreath for 4 tealights, 150 mm ring, 39.5 mm blind recesses
Cults3D
88.9 mm / 3.5 in Lobster Cut Pipe Template STL Set – 7 Pie Cut Angles for Segmented Exhaust Bends
Cults3D
88.9 mm / 3.5 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°
Cults3D
Roadworx Universal Ball Joint 9,5 mm (3/8") Mount with Cable Feed-Through
Printables
48.3 mm / 1.9 in Pie Cut Jig 18° – 5 Sectors per 90° – Lobster Back Elbow CLR 1D 1.5D 2D – Bandsaw Pipe Jig STL
Cults3D

39.5mm cage for Ryobian/mini-Protean

Benzer modeller

39.5 mm cage for Ryobian

2.5" SSD or hard drive cage with spots for side mounted 80MM fans. Holds up to 3 drives that are 7mm 9.5mm or 15mm. Support for SATA, SAS, U.2

Latrax 12mm hex 9.5mm (3/8 inch) extension

2.5" to 3.5" drive adapter for 9.5mm drives

Chip tray for game chips Ø 39–40 mm – 5 troughs of 20 chips, finger pockets

Six-point star tealight holder 90 mm, 39.5 mm blind recess

RC4WD Gelande II D90 - 1:10 Crawler-Staukiste mit zwei Deckelvarianten – 142 × 23,5 × 39 mm

Advent wreath for 4 tealights, 150 mm ring, 39.5 mm blind recesses

88.9 mm / 3.5 in Lobster Cut Pipe Template STL Set – 7 Pie Cut Angles for Segmented Exhaust Bends

88.9 mm / 3.5 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°

Roadworx Universal Ball Joint 9,5 mm (3/8") Mount with Cable Feed-Through

48.3 mm / 1.9 in Pie Cut Jig 18° – 5 Sectors per 90° – Lobster Back Elbow CLR 1D 1.5D 2D – Bandsaw Pipe Jig STL