42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

18° is the angle I reach for most often: 5 sectors give a 90° bend that looks good and doesn't take forever to weld. This jig is for 42.4 mm / 1.67 in OD tube (DN32 / 1.25 in NPS pipe in Europe). One jig – three bend radii: 2D, CLR 84.8 mm / 3.34 in – default 1.5D, CLR 63.6 mm / 2.5 in – add the 1.5D insert 1D, CLR 42.4 mm / 1.67 in – add the 1D insert How it works in my shop: I put the tube in the jig, clamp it in the bandsaw vise and cut. Then I turn the tube 180° and cut again. The sector st…

♥ 0