54 mm / 2.125 in Pie Cut Pipe Cutting Template STL Set – 7 Angles for Lobster Back Exhaust Bends

$13,47CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Complete 7-piece digital STL set of reusable Pie Cut Pipe Cutting Templates designed for approximately Ø54 mm / 2.125 in round tubing. These 3D printable workshop templates are made for manually marking accurate angled cuts on straight tube in order to fabricate pie-cut, lobster-back and segmented tube bends. Instead of using a pre-formed elbow, straight tubing can be cut into individual sectors, rotated and positioned, then welded together to create a custom bend with the required direction an…

♥ 0

Cults3D'da aç

#pie cut template #pie cut exhaust #pie cut pipe #lobster back bend #lobster cut pipe #segmented bend #pipe cutting template #tube cutting template #pipe cutting jig #tube cutting guide #54mm tube #54mm pipe

54 mm / 2.125 in Pie Cut Pipe Cutting Template STL Set – 7 Angles for Lobster Back Exhaust Bends

Benzer modeller

54 mm / 2.125 in Pipe Cutting Template STL – 90° Straight Tube Marking Guide for Angle Grinder

Shop Vac & Dust Collection Hose Adapter Set | STEP IGES STL + Tolerance Drawing | 1.25 1.875 2.5 4 in, 27/36 mm

IKEA VIMLE foot riser 1/2/3/4/5/10/15/20/25/50 mm

54 mm / 2.13 in Flat 3-Into-1 Exhaust Collector Template STL – Three Runner Merge Cutting Jig for Header & Turbo Manifold Fabrication

54 mm / 2.13 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header Fabrication

Cold 2.54 mm pin header alignment jig — HeaderAlign | STL + STEP | JLF-401

ReBore54 — Universal 2-1/8 in / 54 mm Door Lock Re-Bore Guide

Golf Tee 54 mm (2 1/8 in) - 3D Print STL

63.5 mm / 2.50 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header Fabrication

57 mm / 2.24 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header Fabrication

Trichter 30 mm - 4 Ausläufe 2-5 mm, 3 Stiellängen, entlüftet, ohne Stützen

Funnel 30 mm - 4 outlets 2-5 mm, 3 stem lengths, vented, no supports