printedworks
6-Pdr. Field Gun 1841

6-Pdr. Field Gun 1841

Michael Christou · MyMiniFactory

ÜcretsizDownload - Share - Maintain License - Credit - Remix - Noncommercial
Lisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

This is the 6-pounder field gun of 1841 as it was used in the american civil war.I tried to model as accurate as possible but some parts had to be slightly changed to make them printable. I scaled it to about 1:12 so you can use the same wheels as for the "Cannon from Castle of Buedingen" The drawing below was used as a template: Additional you need:- 3 mm x 190mm shaft from brass for the axle. You can flatten the ends with a hammer. Then drill a 1,5 mm hole.- Some nails and needles to fasten t…

♥ 220

MyMiniFactory'da aç

Benzer modeller