76 mm / 3 in Pie Cut Pipe Cutting Template STL Set – 7 Angles for Lobster Back Exhaust Bends

$13,47CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Complete 7-piece digital STL set of reusable Pie Cut Pipe Cutting Templates designed for 3 in round tubing, commonly referenced as approximately Ø76 mm. These 3D printable workshop templates are designed for marking accurate angled cuts on straight tubing so individual sectors can be assembled and welded into pie-cut, lobster-back and segmented tube bends. TUBE OUTSIDE DIAMETER: 3 in / approximately 76 mm 3 in = 76.2 mm. The Ø76 mm value is used as the rounded metric reference for this tubing s…

♥ 0 · ↓ 7

Cults3D'da aç

#pie cut template #pie cut exhaust #pie cut pipe #lobster back bend #lobster cut pipe #segmented bend #pipe cutting template #tube cutting template #pipe cutting jig #tube cutting guide #76mm tube #76mm pipe

76 mm / 3 in Pie Cut Pipe Cutting Template STL Set – 7 Angles for Lobster Back Exhaust Bends

Benzer modeller

76 mm / 3 in (CLR 99 mm) Y-Pipe Bend Cutting Template STL – Exhaust Merge Fabrication Jig

76.2 mm / 3 in (CLR 95 mm) Y-Pipe Bend Cutting Template STL – Exhaust Merge Fabrication Jig

60.3 mm / 2.37 in (CLR 76 mm) Y-Pipe Bend Cutting Template STL – Exhaust Merge Fabrication Jig

Sticky Note Holder with Pen Holes - for 76 mm / 3 in Notes, No Supports (OpenSCAD)

33.7 mm / 1.33 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header Fabrication

76-mm-Divisionskanone M1942 (SiS-3) WW2 Soviet Union

Cabinet pull 3 inch (76.20 mm) hole spacing - wide flat band handle, M4 blind hole, no supports

Rollenspender 25-76 mm – 3 Größen, stützfrei

Roll dispenser 25-76 mm – 3 sizes, no supports

Sticky Note Tray – 3×3" (76 mm) pads, thumb notch, no supports

3" Reel-to-Reel Spool (76 mm) – Decorative Model

Rollenspender 25-76 mm, Profilnut – 3 Größen, stützfrei