90 Degree Dust Hose Elbow — 40 to 32 mm with Fit Gauges — STL + OpenSCAD

Turn a dust hose connection through 90 degrees where a straight hose route meets a wall or nearby tool housing. This kit pairs the adapter with two small calibration rings, so you can check the socket sizes before printing the larger part. - Connection type: female socket at both ends - Intended measured male outside diameters: 40 mm and 32 mm - Designed socket inside diameters: 40.4 mm and 32.4 mm - Diametral allowance: 0.4 mm - Socket engagement: 18 mm per end - Wall thickness: 2.4 mm - Calib…

♥ 0