AEA Sonic magazine, 6.35 (25) caliber

For assembly, you will need: O-ring dimensions: 30 x 1.5 mm Spring wire with a diameter of 0.6 mm, approximately 50 cm per spring. Optional glue for gluing the cover to the magazine body An 8mm drill bit for drilling the cylinder hole to fit the body. After printing, remove the supports and assemble the entire assembly so that the cylinder rotates freely in the magazine body. The photo shows a 5.5mm (22) caliber magazine. Screw on the spring and bend the ends (see photo).

♥ 0