All-in-One 3D Printer Torture Test - Overhangs, Bridges, Holes, Stringing, Thin Walls + Print-in-Place Spinner - STL + 3MF

One compact plate that checks the whole printer in about an hour and 14 g of filament. Every test is labelled on the part itself, so you can read the result straight off the print and compare before and after a tune. **What it tests** - **Overhangs:** five fins at 30, 40, 50, 60 and 70 degrees, angle engraved on top - **Bridges:** 8, 14, 20 and 26 mm spans on 3 mm pillars, length engraved on each deck - **Vertical holes:** 2, 3, 4, 5 and 6 mm blind holes - check dimensional accuracy with a dril…

♥ 0