printedworks
AoS 25mm base movement tray (3.0 coherency friendly)

AoS 25mm base movement tray (3.0 coherency friendly)

FirstyB · MyMiniFactory

ÜcretsizCreative Commons - Attribution - Noncommercial - ShareAlike
Ticari kullanım: izinli görünmüyor · Atıf istiyorLisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Tray to use with 25mm bases that conforms to AoS 3.0 coherency, with each base within 1" of two other bases. Bases are 25mm wide, and with coherency requiring bases to be within 1" (25.4mm) of each other, you're therefore able to be place bases adjacent to them with 0.4mm gap, and still remain in coherency.Inset in the centre are spaces to allow a 16mmx1mm washer to be glued in, allowing magnetised bases to pop on and off easily.

♥ 22

MyMiniFactory'da aç

Benzer modeller