Articulated Hex Snake - Print-in-Place Fidget

A geometric snake of 15 hex segments that prints coiled and wiggles straight off the bed. Each joint is a vertical pin in a C-shaped socket, so the snake bends side to side and stays in one piece. - About 270 mm long when straightened; prints coiled in a 115 x 115 mm area, 11 mm tall - 15 segments, 14 pin joints, each swinging +/-36 degrees - Pins have a V-shaped bulge that sits in a matching socket groove (0.4 mm gap): no supports, no glue - Faceted head with eye dimples and a pointed tail; lo…

♥ 0