Ayrton Senna decorative figure

This piece has been optimized for manufacturing on the Bambu Lab A1 printer using a 0.4 mm nozzle with PLA or PETG filament. A layer height between 0.12 mm and 0.16 mm is recommended to ensure maximum detail on the figure, combined with 2 to 3 walls and 15% infill using a Gyroid pattern. Enabling tree supports on overhang areas such as arms and suspended features is essential to prevent printing failures. To guarantee proper bed adhesion to the PEI plate, apply a 3 mm to 5 mm brim if the contac…

♥ 3