Ball 35 mm with M5 tap hole – tap your own thread, flat base

A 35 mm ball with an M5 tap hole – tap the thread by hand, then screw it onto an M5 screw or rod. M5 is too fine to print; a cut thread holds better. **Uses:** replacement ball knob for a lever; cap for M5 screws and threaded rods. ## Dimensions (measured on the CAD solid) | | mm | |---|---| | Ball Ø / height on the base | 35 / 34 | | Flat base Ø | 11.67 | | Tap hole Ø in the model | 4.4 for M5 | | Usable depth / cone tip | 17.5 / 19.7 | ## Cutting the thread Modelled at 4.4 mm, as printed hole…

♥ 0