Bar knob for D-shaft 6.0 mm - 4 sizes 30/36/44/54 mm, no supports

Two tips opposite each other, the bar knob from old test equipment. Both ends point; mark one with a dab of paint and the setting reads from either side. Fits a 6 mm shaft with the flat at 4.5 mm. The bore is built to 4.6 mm, the knob-side figure from the OKW catalogue per DIN 41591 - the extra tenth is the standard's own clearance, not slop I added. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 30 mm | 17.6 mm…

♥ 0