Bat Fidget Spinner – Spread Wings, Print-in-Place, No Bearings | Halloween STL

A spread-wing bat fidget spinner with ears and eyes cut through. 104 x 54 x 9 mm. HOW IT WORKS: - Print-in-place: the hub and the ring print together, already assembled - no bearings, no glue, no supports. - 45-degree V-joint with a 0.42 mm gap; twist firmly once after printing to free it. - Print flat in PLA or PETG, 0.2 mm layers. If the parts fuse, enable elephant-foot compensation in your slicer. GOOD TO KNOW: - Digital checks: watertight meshes, clearance of the moving parts checked digita…

♥ 0