printedworks
Bike Repair Stand

Bike Repair Stand

Florian Kleiner · MyMiniFactory

ÜcretsizDownload - Share - Maintain License - Credit - Remix - Noncommercial
Lisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

I really liked the idea of the bike stand by bandit-ed. I had some aluminium-tubes laying around with a diameter of 25.3 mm. Since no source files were available I designed my own version of the stand in Fusion 360. You will need 3 M5 screws and nuts to press-fit the parts. Tubes with a slightly smaller or bigger diameter should also fit. I used the following lengths: 2 x 780 mm2 x 367 mm You can find the fusion 360 file here if you want to modify the model.

♥ 104

MyMiniFactory'da aç

Benzer modeller