Bottle cap display tray 125 mm - 9 blind round wells 33 mm, 5 mm deep, caps lie flat, 3 x 3

Bench block, 125 x 125 mm and 9 mm tall, hollowed by BLIND cavities over a solid floor. One solid single-piece model. - Both axes at a 42 mm pitch: 9.0 mm of material between two wells and 4.0 mm of rim on all four sides - A crown cap is 32.1 mm across and 6.0 mm tall: it lies FLAT in a 33.0 mm well, printed face up, and stands 1.0 mm proud - MEASURED ON THE MESH: 9 cavities at mid-height, 0 openings below the floor, 1 single connected body, watertight = True A DISPLAY TRAY, NOT A FRAME. Nothin…

♥ 0