
Bowden motor mount for Anet A8 (above frame both sides)
Dan Rogers · MyMiniFactory
Lisans bilgisi ve sorumluluk reddi
Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.
For anyone like me that likes to use the metal extruder motor mounts. These will fit on the top of the Anet A8 acrylic frame and allows you to bolt the aluminum motor mount using 4 M4X12 screws and 4 M4 nuts. I used M4X10, but I would recommend a little bit of a longer screw if you have them available such as M4X12 or M4X14.Make sure to keep the original frame screws and nuts as those will be used to install this corner piece onto the printer.
♥ 15
MyMiniFactory'da açBenzer modeller

Bowden motor mount for Anet A8 (Above frame, both sides)
Thingiverse

Quick Connect 26-060 – PTFE Passthrough & Filament Hook Cap
Printables

Sovol SV06(+) reverse bowden filamentsensor on toolhead
Printables

Neptune 4 Max reverse bowden upgrade v3
Printables

Elegoo OrangeStorm Giga Bowden 2 fittings
Printables

N4 Filament Mount
Printables

M6 Bowden Adapter for Elegoo Centauri Carbon
Printables

E3D Titan Bowden Adapter M10
Printables

Tronxy XY2 Pro / 2E Filament run out sensor mount with filament guide
Printables

Tronxy XY2 Pro 2E Filament run out sensor mount with filament guide
Printables

PTFE 4-Way Tube Clip – Stays in Place
Printables

Flexible Lead Screw Mount for Bowden Ender 3
Printables