C130 transport aircraft - cargo door can open

C130 transport aircraft Refer to the main image for assembly; glue is needed Printing Tips: Build plate: Use a textured PEI plate. Filament: PLA Layer height: 0.2mm Walls: 2 Acceleration: Set all accelerations to 1000 mm/s² or lower. Important: Due to material shrinkage and print tolerances, some sanding and gluing may be required. Apply even pressure when assembling parts. Before printing, thoroughly clean the PEI build plate to ensure good adhesion, and make sure your filament is dry. Special…

♥ 0