Car-Teeth

-Two white 3D-printed halves form a hollow shell. -The front half has an LED strip (individually addressable or multi-LED modules labeled L1–L23 etc.) glued or taped inside, with clear silicone/gel covering the diodes. -Two M6 threaded bolts with nuts protrude from the top for secure mounting. -The screw holes in the rear half allow the two parts to be joined using 15 mm M3 bolts and corresponding M3 threaded inserts. -Thin black/white power wires exit through a hole for connection to a 12 V ca…

♥ 1