Cherry Blossom pixie and Dice Stand

🌸 Cherry blossom Pixie 🌸 3 walls, 15% gyroid or 3D honeycomb infill. No supports. Tested up to 250%, I don't recommend going below 100% Please use Brims with a brim gap of 0.3 if you are using Textured PEI plate, especially so if its a multi color plate. A little bit of post printing clean up is better than losing the plate due to adhesion issues. Pixie can be mirrored in the slicer to have the branch on different sides, to mirror simply right click and then select "Mirror - Mirror x axis" Ed…

♥ 25