Color My World Pistol

Recommended 3D Print Settings Layer Height: 0.16 mm – 0.20 mm (for optimal detail) Wall Loops / Line Count: 3 perimeter walls Infill: 10% to 15% (Gyroid or Grid recommended) Supports: DISABLED (Print halves lying flat on the cut side) Brim: Recommended (3 mm – 5 mm) to prevent corner warping on long edges Material: PLA or PETG Note for Cura Users: If fine details like the trigger appear faint or skipped during slicing due to model mesh wall thickness, enable Print Thin Walls or set Surface Mode…

♥ 0 · ↓ 2