Compact Manual Sanding Block - STL and Editable Source

A solid faceted hand block with a flat 70 by 35 mm working underside. Wrap a strip of abrasive paper over the underside and hold both ends against the sloped grip; no fasteners are required or included. STL print-orientation dimensions 70 x 22 x 35 mm. Print on the supplied end face, then orient the broad flat face underneath. Manual light-duty sanding only; no power-tool attachment. Paper grip, wear, surface flatness and ergonomics remain untested. Sand the base flat if required. Includes STL,…

♥ 0