printedworks
Cuttlefish Tripod

Cuttlefish Tripod

Per Frederiksen · MyMiniFactory

ÜcretsizCreative Commons - Attribution - Noncommercial - ShareAlike
Ticari kullanım: izinli görünmüyor · Atıf istiyorLisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A foldable camera tripod, that easily can carry a DSLR. The screw will to some extent work, but I will highly recommend using a metal screw instead. Printing: The screw should be printed horizontally as in file for better strength, and a layer height around 0.1 is adviced for better threads. Support is needed, and support roof is adviced. Other parts prints fine without support, if orientation from files is used. Needed parts: 2 pcs m4x20 button head screws. (shorter will work as well) 2 pcs m4…

♥ 17

MyMiniFactory'da aç

Benzer modeller