printedworks
d-bot mgn12h kit

d-bot mgn12h kit

Marius Antonsen · MyMiniFactory

ÜcretsizDownload - Share - Maintain License - Credit - Noremix - Noncommercial
Lisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

This is a simple conversion kit for the dbot. With this adapter and some screws you can upgrade your printer to mgn12h linear rails. By doing so there will be no wobble in the hotend. Y-carriages seems fine without double rails. I would recommend you use two rails on the x-axis(H-bar) Bill of materials per linear railsThis means if you want rails on both top and bottom you need to multiply this by two. Important! - You need to trim the H bar 5mm 4x m5x12 (two on front and two on back)4x M5 wash…

♥ 7

MyMiniFactory'da aç

Benzer modeller