Deadpool Bookmark Hueforge

I use a stronger white for this Depend on the white you have will give different result Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.32mmThe Max allowed Thickness is 1.2mm and the Actual Thickness is 1.04mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 3 unique fila…

♥ 0