Dished knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Low and dished, so the thumb sits in it rather than on it. Good where a knob must not stand proud of the panel. For plain 1/4 inch shafts, held by an M3 grub screw. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 17.6 mm | 1.9 cm³ | 2.4 g | | 20 mm | 17.6 mm | 2.9 cm³ | 3.6 g | | 25 mm | 17.6 mm | 4.3 cm³ | 5.4 g | | 30 mm | 17.6 mm | 5.8 cm³ | 7.4 g | Bore measured on the finished solid: 6.55 × 6.55 mm. #…

♥ 1

Cults3D'da aç

#control knob #knob #dished knob #635mm shaft #1/4 inch #potentiometer #rotary encoder #amplifier #mixing desk #synthesizer #fits cts 450 #no supports

Benzer modeller

Dished knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dished knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dished knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dished knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dished knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports
Cults3D

Dished knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Dished knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports

Dished knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports

Dished knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dished knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dished knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dished knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports