Drawer Divider Set — 8 Interlocking Panels

Four lengths — 120, 160, 200 and 240mm — each in an A panel (slot from the top) and a B panel (slot from the bottom). Cross an A with a B and they lock at 90 degrees with no glue and no fasteners. Panels are 55mm tall and 3mm thick, with 0.35mm of clearance built into the slot so they actually go together off the bed. Printing: no supports, 0.2mm, print flat. Three walls, low infill — they are stiff enough already. Every file passed a watertight/manifold check before publishing. More free files…

♥ 0