Drum knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

$1,11CULTS PU - Private Use

A tall drum with round ribs. All that shell area is what makes a slow, fine turn possible - volume, feed, focus. Takes a DIN 934 hex nut M8 from the back - the thread is steel, not printed plastic, so it survives being done up hard. The bolt runs right through, so its length does not matter. M8 is the machine-table size: clamps, stops, anything that must not shift under a cut. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|…

♥ 0

Cults3D'da aç

#control knob #knob #drum knob #13mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits din 934 #fits iso 4032 #fits din en 20273

Benzer modeller

Drum knob with hex nut pocket M6 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D
Drum knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports
Cults3D
Drum knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Drum knob with heat-set insert M4 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Drum knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Drum knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Drum knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Drum knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Drum knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Drum knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Drum knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Drum knob for Split shaft fine, 24 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D

Drum knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Benzer modeller

Drum knob with hex nut pocket M6 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Drum knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Drum knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Drum knob with heat-set insert M4 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Drum knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Drum knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Drum knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Drum knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Drum knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Drum knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Drum knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Drum knob for Split shaft fine, 24 teeth - 4 sizes 16/20/25/30 mm, no supports