Eevee Sylveon Bookmark Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.2mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #f79dbc PLA Overture Pink Transmission Distance: 3.2 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Pink At layer #10 (…

♥ 0