/https://fbi.cults3d.com/uploaders/16392560/illustration-file/87bd88c6-2315-493c-9240-b9b43afbf539/ESP32_CAM_Pan_Tilt_White_Assembled.png)
ESP32-CAM Pan Tilt Enclosure for 2 SG90 Servos – Snap-Fit Prototype
sasciDesign · Cults3D
Ticari kullanım: izinli görünmüyorLisans bilgisi ve sorumluluk reddi
Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.
A six-part mechanical pan-tilt enclosure for an AI-Thinker ESP32-CAM and two SG90 positional servos. Integral snap-fit clips, captive horn seats and internal wire passages keep the assembly enclosed, with an open top service slot for the microSD card. PROTOTYPE STATUS: digitally checked, not physically printed or assembled. In particular, the screwless servo-horn retention, clip durability, real-component fit and cable movement have not been validated. A fit trial and restricted movement test a…
♥ 0
Cults3D'da açBenzer modeller
CYD 2.8 Case with stylus holder - No screws
Printables
10.1" Elecrow ESP32-P4 Display Panel VESA Enclosure
Printables
Case for 2.8" ILI9341 TFT LCD and ESP32 C3
Printables
ESP32-C3 Zero Case
Thingiverse
ESP32 2432S028 CYD case With UART Cutout
Thingiverse
CYM Case 2432S028R RF-HAT – ESP32-2432S028R (CYD) + NM-RF-HAT Case (battery, GPS, rotary module selector)
Thingiverse
CYM Case NM-CYD-C5 RF-HAT – NM-CYD-C5 (ESP32-C5 CYD) + NM-RF-HAT Case (battery, GPS, rotary module selector)
Thingiverse
DIY ESP32 Home Vehicle Detection System
Thingiverse
ESP32 P4 4.3 Case
Thingiverse
Case for Waveshare ESP32-C6 with 1.47'' touch display
Thingiverse
Simple box for ESP32 and .96 OLED
Thingiverse
Bad_ Usb_ Enclosure
Sketchfab