Ferret Flexi

✨ Ferret Flexi ✨ - 3 walls, 15% gyroid or 3D honeycomb infill. No supports. - Tested up to 177%, I don't recommend going below 70% - Please use Brims with a brim gap of 0.3 if you are using Textured PEI plate, especially so if its a multi color plate. A little bit of post printing clean up is better than losing the plate due to adhesion issues. Editing 3MF - Avoid using the slicer's fill tool when coloring the eyes and eye shine in the 3MF files, because they are split to parts. Instead, assign…

♥ 54