Filament Spool Clips - 3 Rim Sizes, Hold the Loose End of 1.75 mm Filament, No Supports

Small clips that push onto the edge of a filament spool and hold the loose end, so the filament never unwinds or tangles. Pictures are 3D renders of the model files, not photos of a physical print. DETAILS - Three versions for spool rims of about 2.6, 3.2 and 4.0 mm (measure yours with a caliper) - 1.9 mm hole for 1.75 mm filament: push the end through and it stays - Small lead-in at the slot so it slides onto the rim SIZE - 26 x 12 x 8 mm each - 9 min to 9 min and 1-2 g each in PrusaSlicer (3…

♥ 0