printedworks
Fit test for CCS2, NACS and Type 1 plugs – fit rings, free

Fit test for CCS2, NACS and Type 1 plugs – fit rings, free

Magmacode · Cults3D

ÜcretsizCULTS PU - Private Use
Ticari kullanım: izinli görünmüyorLisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

**Free fit rings for the charging plug holder: three cross-sections of the seat per connector type (−2 / 0 / +2 mm), engraved. Slide them over the nose of the unplugged connector and see where it sits in the taper.** Free fit rings for the charging plug holder: three cross-sections of the seat per connector type (−2 / 0 / +2 mm), engraved. Slide them over the nose of the unplugged connector and see where it sits in the taper. - **CCS2:** rings inside 60 × 88, 62 × 90, 64 × 92 mm (width × height…

♥ 0

Cults3D'da aç

Benzer modeller