/https://fbi.cults3d.com/uploaders/52069315/illustration-file/52f3ce6b-fce3-49a9-813b-16f10d3caa18/dimensions.png)
Fraction Tile Set – 36 Pieces, 1 to 1/12
DailyDrillPress · Cults3D
$1,11CULTS CU - Commercial Use
A full fraction tile set: 36 pieces covering 1, 1/2, 1/3, 1/4, 1/6, 1/8 and 1/12, every one of them labelled, every one of them measured against the same 120 mm whole. That last part is what makes a fraction set worth anything. The whole tile is 120 mm long, and 120 divides exactly by 2, 3, 4, 6, 8 and 12. So two halves lay end to end and reach exactly the length of the whole. So do three thirds, four quarters, six sixths, eight eighths and twelve twelfths. And so does 1/2 + 1/3 + 1/6, which is…
♥ 0
Cults3D'da açBenzer modeller
 - 03.1.jpg)
Wall - EXTENDER - Wood - 0.25U Fraction - 1x1 - Straight - Single Thickness - Bare Top - (L-R) - 03.1
MyMiniFactory
 - 02.1.jpg)
Wall - EXTENDER - Wood - 0.25U Fraction - 1x1 - Straight - Single Thickness - Bare Top - (L-R) - 02.1
MyMiniFactory
 - 01.1.jpg)
Wall - EXTENDER - Wood - 0.25U Fraction - 1x1 - Straight - Single Thickness - Bare Top - (L-R) - 01.1
MyMiniFactory
 - 03.1.jpg)
Wall - EXTENDER - Wood - 0.25U Fraction - 1x1 - CORNER - Single Thickness - Bare Top - (L-R) - 03.1
MyMiniFactory
 - 02.1.jpg)
Wall - EXTENDER - Wood - 0.25U Fraction - 1x1 - CORNER - Single Thickness - Bare Top - (L-R) - 02.1
MyMiniFactory
 - 01.1.jpg)
Wall - EXTENDER - Wood - 0.25U Fraction - 1x1 - CORNER - Single Thickness - Bare Top - (L-R) - 01.1
MyMiniFactory

Low Friction Sliders for Coffee Table on Tile
Printables
 - TOP (EDGE) - 1.1.jpg)
Floor - Extender - 3.25U (FRACTIONS) to 4.00U (LEVEL4) - 1x1 - Base (EDGE) - TOP (GRID - EDGE) - 1.1 - TTR Town Minis
MyMiniFactory
 - TOP (EDGE) - 1.1.jpg)
Floor - Extender - 2.25U (FRACTIONS) to 3.00U (LEVEL3) - 1x1 - Base (EDGE) - TOP (GRID - EDGE) - 1.1 - TTR Town Minis
MyMiniFactory
 - TOP (EDGE) - 1.1.jpg)
Floor - Extender - 1.25U (FRACTIONS) to 2.00U (LEVEL2) - 1x1 - Base (EDGE) - TOP (GRID - EDGE) - 1.1 - TTR Town Minis
MyMiniFactory
 - TOP (EDGE) - 1.1.jpg)
Floor - Extender - 0.25U (FRACTIONS) to 1.00U (LEVEL1) - 1x1 - Base (EDGE) - TOP (GRID - EDGE) - 1.1 - TTR Town Minis
MyMiniFactory
 - TOP (CORNER - 1.1.jpg)
Floor - Extender - 3.25U (FRACTIONS) to 4.00U (LEVEL4) - 1x1 - Base (CORNER) - TOP (GRID - CORNER) - 1.1 - TTR Town Minis
MyMiniFactory