printedworks
Geeetech i3 Bowden extruder modification with 40x40 cooling fan support

Geeetech i3 Bowden extruder modification with 40x40 cooling fan support

Andrea Valentino · MyMiniFactory

ÜcretsizDownload - Share - Maintain License - Credit - Remix - Noncommercial
Lisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Here is a version of the poorman's hotend support with the support for the original 40x40mm cooling fan from Geeetech...The assembled 3d explains how all goes together, althought it is very simple...There is also a plate to convert the standard Geeetech extruder into a bowden one.Apart from printed parts, the needed parts for the modification are 5 pcs of large 6mm washers, 4 pcs of small 6mm washers, 3 pcs M6 nuts and 2 pcs M6 air tube fittings for the bowden tube.More details in the 30x30 ver…

♥ 7

MyMiniFactory'da aç

Benzer modeller