GHEVY/GMC C1500/K1500 LS SWAP Engine Harness Plate

GHEVY/GMC C1500/K1500 Engine Harness Plate 21mm center hole for cables I Recommend removing the wheel liner for easier installation. I used Self tapping screw while holding both halves clamped and in place to mark then removed plate to drill the corners on both halves The remaining holes where drilled with the plate installed with corner screws. Tips. -Ensure the screw holes in the plate are slightly larger than your self-tapping screw thread. -Make a simple gasket for the back or apply a bead…

♥ 0