Ghost Trio Fidget Spinner – 3 Cute Ghosts, Print-in-Place | Halloween STL

A classic 3-arm spinner where each arm is a cute little ghost. Try glow-in-the-dark filament. 86 x 78 x 9 mm. HOW IT WORKS: - Print-in-place: the hub and the ring print together, already assembled - no bearings, no glue, no supports. - 45-degree V-joint with a 0.42 mm gap; twist firmly once after printing to free it. - Print flat in PLA or PETG, 0.2 mm layers. If the parts fuse, enable elephant-foot compensation in your slicer. GOOD TO KNOW: - Digital checks: watertight meshes, clearance of the…

♥ 0