Glimmer the Goose Flexi

STL/3MF Multicolor Regular eyes/ 6mm eye sockets 2 Part : Head (plain and kerchief) and body (plain and ribbon) Print Settings: Print in 2 parts No Supports needed Arachne walls 2-3 walls 5-10% infill The heads will need to be heated up to fit over the ball on the neck. Set your printer’s heat bed to 65C, lay the heads on it for a few minutes and then pop them on. If you have adhesion issues, try a brim, glue stick or Aquanet hairspray

♥ 0