printedworks
Greenhouse Tray Kit | 35 mm Grid Feet, Water-Level Clip & 125 mm Cover

Greenhouse Tray Kit | 35 mm Grid Feet, Water-Level Clip & 125 mm Cover

bartsideas · Cults3D

$6,49CULTS PU - Private Use
Ticari kullanım: izinli görünmüyorLisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Raise an egg-crate grid above a greenhouse water tray. Crossing grooves in each foot locate a grid intersection. A clip hangs on the rim and carries two raised water-level references. The optional 125 × 125 × 1.6 mm tile covers part of the water surface. Each foot is Ø20 mm at the base and crown. The grid sits 35 mm above the tray floor with a 3 mm crown and two 2 mm wide grooves. The reference layout uses a 530 × 325 × 40 mm GN 1/1 tray, a trimmed 520 × 315 mm grid and nine feet. Try one foot…

♥ 0

Cults3D'da aç

Benzer modeller