Hair dryer wall plate 110 mm - 48 mm U notch, 22 mm thick, 4 screw holes

Wall plate, 110 x 72 mm and 22 mm thick, cut by a U notch 48 mm wide and 50 mm deep, open at the top edge, with a semicircular bottom. Four THROUGH screw holes of 4.5 mm. - 31 mm of solid plate each side of the notch, 22 mm of solid plate below it -- one piece, one file - The plate screws FLAT against the wall; the handle drops into the notch from above and the body of the dryer rests on the plate, so the 22 mm of thickness act as a collar on three sides - A handle 40 to 46 mm across goes into…

♥ 0