Huben K1 Loading Gate, Pellet Feeder, and Probe (3-in-1) – Caliber 22 (5.5mm)

Assembly and mounting require the following: Glue (cyanoacrylate for PLA; needed to bond the hinge into the prepared recess in the gate body) 1 x wire (1.2 mm to 1.5 mm diameter, approx. 30 mm long) to connect the pivoting part of the gate 2 x M3 x 6 mm countersunk screws to mount the gate to the air rifle 3 x neodymium magnets (4 mm x 2 mm); glue these into the feeder body 4 x neodymium magnets (2 mm x 4 mm); glue three into the probe and one into the gate flap 3 x plastic rods (2 mm x 15 mm);…

♥ 0 · ↓ 1