Key Rail – 4 hooks at 45°, wall mount, no supports

Wall key rail with four 45° pegs, printed flat on the bed with no supports at all. Each peg rises at 45° with a thickened tip, so key rings slide toward the wall and stay put. Two countersunk holes for 4 mm screws (or double-sided tape on the flat back). - 160 × 48 mm, 6 mm plate, pegs reach 26 mm from the wall - 4 pegs, 12 mm wide, 32 mm apart: room for bulky key sets - Countersunk holes, 4.5 mm through / 9 mm head - No supports, no bridging: plate on the bed, pegs grow at 45° - Print time app…

♥ 0